Automatic control valve is designed as the primary control center to direct and regulate all cycles of a down regeneration water softener or er. Parts compatible with all clack ws1, ws1.25, ws1.5, ws2, ws2.5 and ws3 valves, as well as the clack retention tank and in/out lines all genuine clack corporation items.
Compatible with the following typical concentrations of regenerates or chemicals: Sodium chloride, potassium
chloride, potassium permanganate, sodium bisulfite, chlorine and chloramines
Inlet/Outlet (1) ………………………………………………………………………………. 2” Female NPT
Cycles ………………………………………………………………………………………… up to 6
Valve Material ………………………………………………………………………………. Lead free brass
Regeneration ……………………………………………………………………………….. Down flow
CONTROL VALVE FLOW RATES
Service 15 psi drop (includes meter)…………………………………. 115 GPM
Backwash 25 psi drop ……………………………………………………. 80 GPM
CV Service ………………………………………………………………………… 29.7
CV Backwash ……………………………………………………………………. 16.0
OPERATING PRESSURES
Minimum/Maximum …………………………………………………………… 20 psi – 125 psi
OPERATING TEMPERATURES
Minimum/Maximum …………………………………………………………… 40º – 110º F
METER SPECIFICATIONS
Accuracy ………………………………………………………………………….. ± 5%
Flow Rate Range……………………………………………………………….. 1.5 – 150 GPM
Gallon Range…………………………………………………………………….. 20 – 1,500,000 gallons
Totalizer……………………………………………………………………………. 1 – 9,999,000 gallons
DIMENSIONS & WEIGHT
Distributor Pilot
Valve bodies with 2″ Female NPT Inlet & Outlet…………….. 1.90” OD (1.5″ NPS)
Drain Line Connection (drain line adapters not included) ……… 1.5” Female NPT
Brine Line Adapters Included……………………………………………… 1” Male NPT elbow, ¾” x 1” solvent weld elbow and 1⁄2″ OD Poly Tube Compression
Mounting Base………………………………………………………………….. 4” – 8 UN
Height From Top Of Tank……………………………………………………. 8.5”
Shipping Weight With Meter ………………………………………………. 29 lbs.
ELECTRICAL SPECIFICATIONS AC Adapter
U.S. International
Supply Voltage …………………………………………………………………..120V AC…………. 230V AC
Supply Frequency………………………………………………………………60 Hz……………… 50Hz
Output Voltage …………………………………………………………………..20V AC…………… 20V AC
Output Current…………………………………………………………………..750 mA…………… 750mA
CYCLES OF OPERATION
Softener Filter
Cycle Range of time in minutes
1. Backwash 1st (up flow) ……………………………………………………..1-95……………….Backwash 1-95
2. Regenerate Draw/Slow Rinse (down flow) …………………………1-180
3. Backwash 2nd (up flow)……………………………………………………..1-95
4. Fast Rinse (down flow) …………………………………………………….1-95……………….Rinse 1-95
5. Regenerate Refill (in service with treated water)……………….. 0.1-99.0 or off
6. Service (down flow)
Reviews
There are no reviews yet.