UltraFiltration UF System

The ideal applications for water filtration System
Home ·Our Services ·UltraFiltration UF System

UltraFiltration UF System

Ultra filtration is a unique pressure-driven physical separation process in which the water is passed through porous (partially permeable) membranes with pore sizes in the range of 0.1 to 0.01 micron. These membranes are in the form of long hollow fibres. The result is high pure water free from physical and biological contaminations.

UF Water systems designed for a variety of industrial & commercial applications requiring high quality equipment with a fast delivery and competitive price. These pre-engineered, pre-assembled and factory tested units minimize installation and start-up time. With simple utility connections and easy to set up controls, the UF plant is ready for quick on-line service. The control system is an advanced microprocessor based system that is very easy to use.

Features :

    Ultrafiltration is a low-pressure membrane process used to separate bacteria, viruses, and high molecular weight compounds colloidal and particulate matters from a feed stream. Ultra Filtration Plant has larger pores and high permeability with less osmotic effects that allows Ultra filtration plant to operate at relatively lower pressure than nanofiltration and reverse osmosis and is therefore it is least costly to operate.

    industrial ro water filter plant system  in UAE

    High removal efficiency of bacteria and viruses

    Periodically back washed and air scoured for consistent performance

    Simple, vertical, modular design allows low cost, compact systems

    Fully automated control system for backwashing process

    High end electrical actuated operating valves.

    All alarm and shut down conditions are indicated on the control interface.

    Control panel with standard PLC and HMI interface mounted on equipment frame.

    Permeate, back pulse pumps, membrane aeration blowers and associated valving mounted on equipment frame


Technology

Pre-treatment

Treatment of feed prior to the membrane is essential to prevent damage to the membrane and minimize the effects of fouling which greatly reduce the efficiency of the separation. Types of pre-treatment in Ultra Filtration Plant manufacturer are often dependent on the type of feed and its quality. For example in wastewater treatment, household waste and other particulates are screened. Other types of pre-treatment common to many UF plant include pH balancing and coagulation. Appropriate sequencing of each pre-treatment phase is crucial in preventing damage to subsequent stages. Pre-treatment can even be employed simply using dosing points.

Post Treatment

Ultra filtration system of Ultra Filtration Plant manufacturer can either operate with cross-flow or dead-end flow. In dead-end filtration the flow of the feed solution is perpendicular to the membrane surface.

On the other hand in cross flow systems the flow passes parallel to the membrane surface. Dead-end configurations are more suited to batch processes with low suspended solids as solids accumulate at the membrane surface therefore requiring frequent back flushes and cleaning to maintain high flux.

Cross-flow configurations are preferred in continuous operations as solids are continuously flushed from the membrane surface resulting in a thinner cake layer and lower resistance to permeation.

Cleaning

Cleaning of the membrane of UF plant is done regularly to prevent the accumulation of foul-ants and reverse the degrading effects of fouling on permeability and selectivity.

Regular backwashing is often conducted every 10 min for some processes to remove cake layers formed on the membrane surface. By pressurizing the permeate stream and forcing it back through the membrane, accumulated particles can be dislodged, improving the flux of the process. Backwashing is limited in its ability to remove more complex forms of fouling such as biofouling, scaling or adsorption to pore walls.

These types of foulants require chemical cleaning to be removed. The common types of chemicals used for cleaning in Ultra Filtration Plant manufacturer are:

Acidic solutions for the control of inorganic scale deposits

Alkali solutions for removal of organic compounds

Biocides or disinfection such as Chlorine when bio-fouling is evident

Performance of UF System

In high purity water systems, ultra filtration is slowly replacing the traditional 0.2 micron cartridge filters.

An UF filtration has a nominal pore size of 0.003 micron.

Membranes should be cleaned when the system permeate rate drops by 10% or more.

In addition UF membrane is not susceptible to the problem of bacteria growing through them, as is the case with 0.2 micron filters.

UF water system video tutorial

Take a tour & see the UltraTec Water Treatment company in UAE

Range of UF units utilises the most modern membrane technology and consists of a modular design. In its simplest presentation ultra filtration system is a membrane process. That acts a molecular filters to remove (Permeable to water not salt and separating pure water and salt solution.

Purpose
Security
Applications

Why Choose Our Service Ultra filtration (UF) is an important purification technology used for the production of high-purity water in the many industries. When strategically combined with other purification technologies in a complete water & Wastewater system. UF membranes of UF plant used to remove high molecular-weight substances, colloidal materials, silt, turbidity, organic / inorganic polymeric molecules, algae, particulate matters, suspended solids and all microorganisms from Water & Wastewater.

User-friendly programmable controls

High quality components ensure continuous, reliable operation

Pre-engineered & factory tested systems mean easy installation

CEB (Chemical enhance backwash) connections maximize system availability

Compact footprint saves valuable floor space

Quick equipment delivery keeps project moving fast

Most comprehensive cleaning capability ensures peak system performance

Pre & Post Treatment for RO Plant

Cooling Tower make up & blow down Water Treatment

Water for injection (WFI), & Waste water recycling

CEB (Chemical enhance backwash) connections maximize system availability

Drinking Water & River Water Treatment

Zero Liquid Discharge system, & Tertiary Treatment

Colloidal silica removal, & Heavy metal removal

  • We Use AI In The Line Excellent purification of water from various elements, hardness and contaminants,
  • Smart RO PlantsHigh efficient with sediment filters that removes sediments and suspended particulates from water,
  • 100% AccuracyThese RO Plant Manufacturers are also used in offices, homes, hospitals, nursery homes, clinics, gyms, beauty salons, restaurants, schools and shops.

Related Products

Industrial Ultra Filtration Systems

Ultra Tec Water Treatment supplies a full line of standard and fully customizable Ultra Filtration systems, all of which are engineered using advanced 3D computer...

Uf Membrane Module For Water Treatment

Ultra Tec Water Treatment LLC UAE concentrates on the research, development and application of ultra-filtration membranes systems. We are the company....

Ultrafiltration Plants Manufacturers for Waste-water

UF membranes used to remove high molecular-weight substances, colloidal materials, silt, turbidity, organic or inorganic polymeric molecules, algae, particulate...

Gray Water STP Sewage Treatment Plant for Marine

Sewage Treatment Plant (STP) for Marine to treat the sewage, which means human body wastes and the wastes from the toilets on vessels and which is also called “black water”...

We can be your great business partner and help you growth strongly.